blogImage
Share

How To Check The Construction Quality Of A New Home?

Who would be willing to buy and live in an unsafe building? Nobody. So, if you're a homeowner considering buying a property, inspecting and measuring the project's building quality should be a top priority. It is quite difficult for a homeowner to judge the quality of building materials used in a large-scale residential project, a duplex, or an independent floor. However, there are some techniques that property owners may use to ensure that they are not being duped by branded sanitary ware, high-quality beams and columns, and the best water pipes and power wiring. Here are the eight critical measures you must take as a buyer to ensure the quality of your new home's construction.

 

8 CRITICAL MEASURES TO ENSURE THE QUALITY OF NEW HOME'S CONSTRUCTION

Investigate the soil quality

The type and quality of the soil on which the building is constructed are extremely important. The soil type varies by location, and the type of soil impacts whether it can support a high-rise foundation. Clay-rich soil and black cotton soil are two examples of soils that should not be used for building because they stretch, swell, and shrink in response to moisture or water. Before the construction process begins, a soil test is performed. Your developer should be able to provide you with a copy of the test.

Determine the structure design

A building's structural design refers to how well and efficiently the walls, roof, beams, and columns are designed. It is suggested that you obtain the design from the builders and confirm it with a skilled expert.

It is not advisable to invest in such properties unless the design incorporates security, safety, and rigidity to withstand natural risks, harsh weather conditions, and is fire-resistant. 

Assess the wall thickness

In the layout agreements, the developer is obligated to state the wall thickness. Examine the construction location to see if it is accurate. You can also run a test by pressing any key against the wall. If you can easily make a hole, inquire about the concrete mix with the builder. Check the hollowness or use of plywood inside the walls by tapping the walls with your knuckles. To give strength to the structure, builders frequently utilise plywood walls. Termites, on the other hand, can cause harm to such structures if they are not adequately treated.

Gauge the concrete quality

Best builders in Kerala inspect the concrete mix for strength, as the concrete grade and concrete-to-sand ratio are critical for building quality. By hammering a nail into the walls, a buyer or owner can verify this. If this action is completed quickly, the quality of the concrete will be compromised.

Examine the plaster quality

Another vital step to examine before purchasing a property is the quality of the plaster. Water leaking and poor plaster quality are indicated by cracks in the plaster. Allowing the builder or anybody else to paint the house without first examining it for cracks is a bad idea.

After a few months, plaster cracks can form. As a result, investing in buildings built by reputable builders is recommended. Second, let the paint dry for a few months before applying another layer. Even if there are little cracks, you can repair them with the help of the builder.

Check the paint quality

Buyers should inspect the paint condition on the walls. Good paint on the walls and wooden surfaces not only enhances visual appeal but also extends the life of the surfaces. Cheap paint, on the other hand, has a poor finish and has a shorter lifespan. This may need repainting the walls shortly.

Quality check of fitting & fixtures

When assessing the construction quality of a property, pay close attention to the smallest of details. The quality of a new home's fittings and fixtures determines the homeowners' degree of comfort, so while you're there, go around and check that all of the switches and electric circuit systems are in good working order. 

Examine the condition of kitchen and bathroom fittings, such as faucets, showerheads, washbasins, and drainage pipes. If you observe any kind of water leaks or other defects, as well as proper placement of doors and window panes, you must immediately notify the builder.

Check the quality of the sanitary goods and bathroom fixtures.

Checking the general shape of sanitary ceramics and accessories such as toilets, washbasins, face cleansers, and bidets is the best approach to determine their quality. Fittings of good quality should be easy to use. You can also check for cracks by lightly tapping it; a raspy sound indicates the presence of cracks. Aside from that, you can inspect the mounting surface for evenness and smoothness. Check the water flow and speed, the type of faucets used, and how easy it would be to replace or locate parts for bathroom fittings. To avoid mishaps, you should also inspect the bathroom tiles and insist on anti-skid ones.

Builders and property owners entice buyers with innovative marketing strategies that include cutting-edge services and high-quality materials. The buyers have the right to inspect and study every last detail of the construction. A comfortable stay requires longevity, durability, and robustness. This is what we at CMR DEVELOPERS aim to provide our customers with. We have a technical staff of highly skilled construction professionals and a team of experts in estimating, purchasing, cost engineering, scheduling, safety, risk management, and community relations that support each project. We are and will continue to be committed to improving the customer experience by providing the finest houses possible. The company has provided customers with not only high-quality homes but also promising returns.

 

Share